岳阳巴陵石化热塑性弹性体SIS 1106
牌号： SIS1106
产品性能：
外观：白色或浅色，不含机械杂质及油污
结构：线型
密度：880～930kg/m3（20℃）
SI含量 (10)：16.7
嵌段比SI：15/85
挥发份(质量分数) %：≤0.70
溶液粘度mPas：≤2000
拉伸强度 (≥MPa)：8.0
扯断伸长率 (≥%)：800
熔体质量流动速率 (g/10min)：7.0~17
邵氏硬度 (A)：35
主要应用领域：胶带、标签等。岳阳市巴陵佳云石化有限公司长期备有现货。
包装：苯乙烯-异戊二烯嵌段共聚物（SIS）产品用纸塑复合袋或内衬黑色聚乙烯薄膜的聚丙烯编织袋包装，每袋产品净含量为25kg±0.25kg或20kg±0.20kg。
运输：在运输过程中，应采取措施防止日光直接照射和雨水浸泡，运输车辆应整洁、避免包装破损和杂物混入，不属于危险品。
贮存：苯乙烯-异戊二烯嵌段共聚物（SIS）产品应贮存在通风、干燥、清洁并保持有良好消防设施的仓库内。贮存时，应成行成垛整齐堆放，并保持一定行距，远离热源，并防止阳光直接照射，严禁在露天堆放。贮存期从生产之日起，一般不超过24个月。
Yueyang Baling Petrochemical Thermoplastic Elastomer SIS 1106
Brand： SIS1106
Product performance：
Appearance： white or light color, no mechanical impurities and oil
Structure： Linear
density：880～930kg/m3（20℃）
SI content(10)：16.7
Block ratio SI：15/85
Volatile fraction( mass fraction) %：≤0.70
Solution viscosity mPas：≤2000
Tensile strenth(≥MPa)：8.0
Elongation(≥%)：800
Melt flow rate(g/10min)：7.0~17
hardness shore(A)：35
Major End Use： Adhesive tape, label, etc. Yueyang City Jia Yun Baling Petrochemical Co. Ltd. long-term stock.
Packing：（SIS）25kg±0.25kg或20kg±0.20kg。The styrene isoprene block copolymer (SIS) product is packed in a paper plastic composite bag or a polypropylene woven fabric lined with black polyethylene film, and the net content of each bag is 25kg + 0.25kg or 20kg + 0.20kg.
transport： During transportation, measures should be taken to prevent direct sunlight and rain soaking. Transportation vehicles should be neat, avoid packaging damage and debris mixed, not dangerous goods.
Keep in storage： Styrene - isoprene block copolymer (SIS) products should be stored in a warehouse that is ventilated, dry, clean and maintained with good fire protection facilities. In storage, it should be stacked and stacked in neat rows, keep a certain distance, keep away from the heat source, prevent direct sunlight from irradiation, and strictly prohibit stacking in the open air. The storage period is generally not more than 24 months from the date of production.
