巴陵石化热塑性橡胶SEBS YH-507、507H
YH-507 通过添加增粘树脂和加工油等助剂可制备自粘保护膜用专用料。专用料作为双层或多层共挤薄膜(多为PE膜)中的胶粘层。SEBS/PE 自粘保护膜主要应用在以下行业:(1)五金行业。如铝板、不锈钢板、塑钢板、玻璃板等。(2)电子行业。如液晶显示器、手机屏幕、空调及各种家用电器表面等。(3)建材行业。如天花板、人造大理石、瓷砖等。其目的是防止受保护基材表面在运送、装配或加工过程中受到损害或污染。
YH-507、507H 性能指标和应用
项目名称 典型值(但不限制)
结构 :线型
苯乙烯含量 %: 15
挥发份,% ≤ :1.0
300% 定伸强度,MPa ≥: 1.2、1.0
拉伸强度,MPa ≥: 8.0
伸长率,% ≥:706、800
硬度,邵 A :55、54
MFR,g/10min(5Kg,200℃ ) :3.8、0.8-1.2
应用领域 制备自粘保护膜
Baling Petrochemical thermoplastic rubber SEBS yh-507, 507h
Yh-507 special material for self-adhesive protective film can be prepared by adding additives such as tackifying resin and processing oil. Special material is used as adhesive layer in double-layer or multi-layer coextrusion film (mostly PE film). SEBS / PE self-adhesive protective film is mainly used in the following industries: (1) hardware industry. Such as aluminum plate, stainless steel plate, plastic steel plate, glass plate, etc. (2) Electronics industry. Such as liquid crystal display, mobile phone screen, air conditioner and various household appliance surfaces. (3) Building materials industry. Such as ceiling, artificial marble, ceramic tile, etc. The purpose is to prevent the surface of the protected substrate from being damaged or contaminated during transportation, assembly or processing.
Yh-507, 507h performance index and Application
Project name typical value (but not limited)
Structural: Linetype
Styrene content%: 15
Volatile matter,% ≤: 1.0
300% constant tensile strength, MPA ≥: 1.2, 1.0
Tensile strength, MPA ≥: 8.0
Elongation,% ≥: 706, 800
Hardness, Shao A: 55, 54
MFR,g/10min(5Kg,200℃ ) :3.8、0.8-1.2
Application field preparation of self-adhesive protective film |